Overview

List | Next >

Unboxing SmartBench

Your SmartBench is packed into four boxes and contains all the necessary components needed for installation, thanks to our expert packing department.

We’ll show you what is packed in each box, so that you can check that you’ve got everything you need before you start.

• Unboxing SmartBench

Assembling SmartBench

We will show you everything you need to know about assembling SmartBench, from installing the first pair of legs to fitting the final cable connection.

• Fitting the first pair of legs

• Fitting the lower X beam

• Fitting the second pair of legs

• Fitting the upper X beam

• Connecting the beam cable

• Fitting the Z head

• Fitting the dust shoe plug

• Fitting the Z probe plate

• Fitting the console

• Fitting an extractor

• Fitting the power cable

Preparing SmartBench for its first job

We will walk you through turning on SmartBench for the first time, setting up your Console, and adjusting any machine settings. By the time you’ve finished this section, SmartBench will be job ready!

• First power up

• Activating SmartBench

• First homing

• Setting up the Console

• Calibrating SmartBench

• Powering off SmartBench (including emergency shutdown) 

Preparing you for your first job…

We’ll give you an overview of your next steps, so that you can choose to set up your computer, start your first project, or keep reading up on all things SmartBench. 

• Next steps...

List | Next >