Principles for locking offcut sheet material
Once you are happy with the position of the material, fix it properly to SmartBench. You can use:
-
Woodscrews
-
Double sided tape
These are the easiest and most commonly used methods; click here to learn more about other workholding techniques.
Woodscrews
It is possible to fix material directly to the clamp panels (A) of the Y Bench or to a spoilboard under the stock material using woodscrews. Make sure that they are:
-
Positioned away from the cutting toolpaths to prevent damages to the tool.
-
Driven at least 1 mm below the top surface of the material (provided you are using a spoilboard), so as not to disturb flatness.
Double sided tape
You can fix smaller materials to SmartBench with double-sided tape.
Make sure your chosen tape has the right properties for your stock material. For example, use woodworking tape to properly fix wood offcuts.