BigFoot Beta Z-Head Preparation 1.1 / 1.2a

Important notes:

Remove the Z-Head from Smartbench before this installation and preparation

The bigfoot beta installation will remove the dust shoe light function

Ensure you have enough safe space to work on your Z-Head before beginning. Place your Z-Head on the side as below:


Tools required:

3mm driver

4mm driver

Step 1: Remove the extraction elbow

With a 3mm driver remove 2 bolts holding on the extraction elbow and the o-ring


Step 2a: Lift up the two spindle windows

Step 2b: Unscrew the 4x bolts holding on the dust shoe

Move the existing dust shoe cable to above the bottom Z-Head plate. Use the included Zip Tie if required to secure it in place.

Step 3

Ready to install the BigFoot Upgrade!!

Any questions, issues or suggestions contact us via a support ticket.

Keep your old dust shoe safe just in case you would like to reinstall it in the future

You've completed this article

Next article

Are you sure?

This link will take you away from the CNC Academy


Follow link

The page will open in a new tab/window.